GUIDE FOR BUSINESSES
Data erasure or physical destruction: which suits your business
Updated
Secure erasure removes the data and preserves the storage device, which can be used again. Physical destruction renders the device unusable along with its data. If the drive works and supports verifiable erasure, erasing it lets you reuse or sell the equipment. Destruction is the right option when the device is faulty, when erasure cannot be verified or when an internal policy requires it.
At a glance
| Criterion | Secure erasure | Physical destruction |
|---|---|---|
| What happens to the device | It is preserved and keeps working | It is rendered unusable |
| Reusing or selling the equipment | Possible, if the device’s condition allows it | Not possible; the device must be replaced |
| How the result is checked | With a verification for each device after erasure | By checking that the device has been physically destroyed |
| Faulty devices | They may not support verifiable erasure | They can be processed even if they do not work |
| Where it takes place | It can be done at the business premises, with the equipment connected | On site with mobile machinery or at an external facility |
| Waste | None while the equipment remains in use | It produces electronic waste that must be managed |
When secure erasure is the better choice
- You are reassigning the equipment within the business.
- You want to sell or donate it, or return it at the end of a lease.
- The storage devices work and support erasure that can be verified.
- You need a record for each device with its serial number, method and result.
When physical destruction is the better choice
- The device is faulty and cannot complete erasure or its verification.
- An internal policy, a contract or the classification of the information requires the device to be destroyed.
- The equipment has no reuse value and will be handled as waste.
HDDs and SSDs are not erased the same way
On a magnetic hard drive (HDD), overwriting the entire addressable area and verifying it afterwards is a common method. On a solid-state drive (SSD), overwriting may not reach every cell, because the drive redistributes writes and reserves areas the system cannot see. That is why the device’s own sanitisation commands or cryptographic erasure are used instead, when the model supports them. The method is chosen for each device, not for the whole batch.
What the standards and the GDPR say
The main technical references, NIST SP 800-88 and IEEE 2883, classify media sanitisation into three levels: Clear, Purge and Destroy (Destruct in IEEE 2883). The first two remove the data and normally leave the device fit for reuse; the third renders it unusable. Both recommend choosing the level according to the sensitivity of the information and what will happen to the device, and both cover verification of the result.
The General Data Protection Regulation (GDPR) does not prescribe a specific method. It requires personal data to be protected with appropriate security measures (Articles 5(1)(f) and 32) and the ability to demonstrate compliance (Article 5(2)). Both erasure and destruction can meet that goal if they are appropriate to the risk and documented: which device was processed, with which method and with what result.
This page is for information only and does not constitute legal advice.
What Datawipe does
Datawipe erases and verifies data at business premises in Málaga and provides a report for each storage device. The service focuses on erasure: if a device cannot be verifiably erased, we record it as an issue and agree with you on the next step.